S&S Cycle Performance CAM KIT; T/CAM07-17 MR103GE

CAM TYPE
510C Chain Drive Cam Kit for 1999–2006 Twin Cam models (except 2006 Dyna)
Designed for use with stock splined drive gears

APPLICATION
Bolt-in cam for 88" engines with compression ratios below 9.7:1
Ideal for stock, un-ported heads
Uses stock pushrods, springs and lifters
Best performance in the 3000–5000 RPM range

INTAKE SPECS
Open: 20°
Close: 38°
Duration @ .053": 238°
Valve Lift: .510"

EXHAUST SPECS
Open: 52°
Close: 20°
Duration @ .053": 252°
Valve Lift: .510"

INCLUDED ITEMS
(1) Front chain drive cam
(1) Rear chain drive cam
(1) Large O-ring
(2) Small O-rings
(2) 22 × 29 × 12.5 needle bearings
(1) 20 × 42 × 12 bearing
(1) 20 × 42 × 13.5 bearing with O-ring
Instructions

LEGAL NOTICE
The Air Resources Board (ARB) prohibits the use of aftermarket emission-related parts that alter the air/fuel ratio on emission-controlled vehicles. This item cannot be shipped to California.