S&S Cycle Performance CAM KIT; T/CAM07-17 MR103GE

CAM TYPE
510C Chain Drive Cam Kit for 1999–2006 Twin Cam models (except 2006 Dyna)
Designed for use with stock splined drive gears

APPLICATION
Bolt-in cam for 88" engines with compression ratios below 9.7:1
Ideal for stock, un-ported heads
Uses stock pushrods, springs and lifters
Best performance in the 3000–5000 RPM range

INTAKE SPECS
Open: 20°
Close: 38°
Duration @ .053": 238°
Valve Lift: .510"

EXHAUST SPECS
Open: 52°
Close: 20°
Duration @ .053": 252°
Valve Lift: .510"

INCLUDED ITEMS
(1) Front chain drive cam
(1) Rear chain drive cam
(1) Large O-ring
(2) Small O-rings
(2) 22 × 29 × 12.5 needle bearings
(1) 20 × 42 × 12 bearing
(1) 20 × 42 × 13.5 bearing with O-ring
Instructions

LEGAL NOTICE
The Air Resources Board (ARB) prohibits the use of aftermarket emission-related parts that alter the air/fuel ratio on emission-controlled vehicles. This item cannot be shipped to California.

Shipping costs are calculated at checkout. Check the Supplier Direct notice above, where shown, for additional delivery information.

View shipping policy

View returns policy

Need help choosing a size or checking a part? Email weborders@joerascal.com.au. For parts enquiries, include your motorcycle model and year.