126 Tooth x 1-1/2in. Wide Final Drive Belt. Fits 4Spd Big Twin 1980-1986 with 70 Tooth Rear Pulley. - Belt Drives Ltd

Features & Benefits:-

* The PCC belt is manufactured by Gates Rubber. Gates is one of the OEM’s to HD with this type of belt.

* The belt is made with polyurethane with carbon cord this belt is a standard workhorse.

Suggested Additional Purchase:

Primary Gasket Kit # CG-C9887 or JGI-60538-85-K

Tech Tips:-

* Count the Teeth on your Belt before Ordering!

* Avoid Improper Handling - Twisting, Pinching, Kinking or Prying.

* Avoid Improper Belt

Alignment, toe in or toe out, chamber tilt left or tilt right, vehicle alignment early model FXR’s, FXD’s, FLT’s.

* Avoid Improper belt tension: too tight, too loose.

* Avoid Worn out pulleys not replaced at time of belt replacement.

* Avoid Oil leaks that cause oil to penetrate belt, chemical reaction to Belts.

* Avoid Shocks that cause improper belt tension due to raising or lowering.

* Avoid Broken Shocks or Shock Studs.

* Avoid Failure to properly readjust

new belt as it seats into pulleys at 800 and 1600 klms, and at regular services.

* Avoid Road debris, rocks, metal, glass, tire tread or re-tread pieces, etc.

* Avoid Failure to properly readjust belt on bikes overloaded for long trips.

* Avoid Chemicals used to clean motorcycle - chemical reaction to Belts.

* Avoid Racing, burnouts, wheel stands, all affect tension & alignment.

* Avoid Worn or broken pulley isolator rubber/s.

* Avoid Reverse Over Bending of

Belt.

* Avoid Belt that Rubs or has Contact with the Belt Passage Way.

Proudly Made in the USA by Gates Rubber !