1-Way Check Valve Fitting. 5/32in. Push to Connect. - Legend Suspension

Instructions

1. Remove shock from bike

2. Attach one way valve directly to the shock via a small section of the black piping (you may want to purchase a small piece of the black air pipe explicilty for this purose)

3. Connect otherside of one way valve to existing compressor line >> inflate shock

4. Unclip existing compressor line , leaving pipe & one way valve attched to shock

5. Submerse in water & watch for PROFUSE & OBVIOUS air bubbles

>

** Note - pin head sized bubbles will float every second or so - this is normal - shocks lose around 20-30 psi over night & are designed to be inflated each time before riding